Before start reading: please consider, if this article is useful to you or if you just appreciate my work on it, to support me just sharing this article with your friends by your favourite Social Network. This would be a really appreciated help. Have a nice reading!
Last Updated on
While working with Raspberry PI, I often see on search engines results many Arduino projects connecting electronic sensors and devices. So I ended deciding to give it a try and enter in this amazing world so spread within makers. Looking for available starter kits on ecommerce I noticed one coming from an industry I already experienced in my Control a simple stepper motor with a Raspberry PI project: Elegoo.
The kit I’m going to review is ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE.
By the way, I was able to contact Elegoo Marketing Team and obtained a special coupon for peppe8o.com readers to get a discount on Amazon for Elegoo kits. This will be added soon in this page, so stay tuned!
If you want to understand main differences between Arduino and Raspberry Pi, please refer to my Arduino vs Raspberry PI article.
Differences Between Arduino And Elegoo Controller Board
This is the first question everyboy asks himself. the answer is quite simple: only factory where it was built. Arduino is an open-source project and Elegoo is using the same project to build its board. In fact, also Elegoo Industries invites customers to evaluate a donation to Arduino project. Supporting Arduino Foundation is the best way to assure these amazing projects can continue in future to enjoy young and old people. Also from me, consider contributing to Arduino with the following link: https://www.arduino.cc/en/Main/Contribute
Elegoo Super Starter Kit Description
Ordered from Amazon, this kit arrived in a few days. Shipped from Amazon, the overall packaging merits few word for care on details and security which come both from the shipper and the producer. The outer pakage is the classic Amazon Prime one, with a bubble bag securing products from accidental shocks. This bag is about 25×38 cm.
Opening the Prime package, a second bubble bag come from Elegoo Industries. A 22×25 cm bag protects doubly my kit. What confirms care on packaging is a lateral label suggesting the customer to reject and do not sign the package if the seal on this bubble bag is damaged or peeled off.
Inside The Bags…
Once opened the second bag, content appears well suited in a solid case (please find below top and bottom pictures):
This case is 20x15x5 cm and its weight is about 600g. Opening the case we can find all items ordered and carefully packaged in single small sachets. A useful list and description is printed below the cover, to better identify single components and its function.
Kit components are listed in following table:
|Uno R3 Controller board||LCD 1602 module||Prototype Expansion Module|
|Power Supply Module||ULN2003 Stepper Module Driver Module||Stepper Motor|
|Servo Motor SG90||5V Relay||IR Receiver module|
|Joystic Module||DHT11 Temperature and Humidity Module||Ultrasonic Sensor|
|Fan Blade and 3-6V Motor||Active Buzzer||Passive Buzzer|
|Potentiometer||1 Digit 7-Segment Display||4 Digit 7-Segment Display|
|Tilt Ball Switch||Romote||830 Tie-points Breadboard|
|USB Cable||Female-to-Male Dupont Wire||Breadboard Jumper Wire|
|9V Battery with Snap-on Connector Clip||Resistors||LEDs|
|RGB LEDs||Thermistor||Diode Rectifier|
|Photoresistor (Photcell)||NPN Transistor||CD with guides and examples|
The only suggestion I can give to Elegoo, is to use a bit bigger case: once pieces are put out of the box, it’s really hard to recompose the puzzle and fit again them in.
Personal Impressions About the Kit
People ordering this kit figure of cheap, little and low quality kit. When kit arrived, I was positively surprised both on number of components available inside the kit and the good-to-excellent quality. Every piece can be used alone – for simpler projects – or together with other one – for more and more complex projects – with a stunning ease of use. CD and docs on Elegoo website include clear instruction both on connecting electronics and programming on IDE.
Opening the case I remembered the same emotions I felt when I was young and disrupted RC cars and radio to get a look at their circuits, motors and their working, but never being able to get them back to work. With these kits, also kids are now able to build their personal robot and learn programming and composing circuits in a very few days.
Special Coupon For Peppe8o.com readers
—::: COMING SOON :::—
This kit is a surprising solution capable of attracting interest for childrens of all ages and makers. It makes very easy to learn electronics and programming. Like all Arduino projects, its low voltage assures security also for childrens.
In my opinion, it is the right way to enter the fabulous world of Arduino and start your journey in electronics.