Using Pascal Programming Language With Raspberry PI

5
(12)

Last Updated on 6th February 2022 by peppe8o

What Is Pascal

Many people from my age still remember from university studies what is Pascal.

A wide description of this very old programming language can be found in Wikipedia Pascal description page.

Pascal is an imperative and procedural programming language, created as a small, efficient language intended to encourage good programming practices. It is named in honour of the French mathematician, philosopher and physicist Blaise Pascal.

It was very successful in the 1970s, notably on the burgeoning minicomputer market. Widely used as a teaching language in university-level programming courses in the 1980s, it was also used in production settings for writing commercial software during the same period.

Beside others, some wide companies included Pascal in their systems (like, for example, IBM and Apple).

Because of its great success, there where a number of implementations, most famous being Borland Pascal (also known as Turbo Pascal).

In this guide I’ll show you how to install and configure Free Pascal in your Raspberry PI. I’ll also show you how to setup a simple and useful terminal IDE to control and analyze your Pascal code.

I’ll use Raspberry PI Zero W, but this guide works also with newer Raspberry PI boards.

HW Requirements

Free Pascal is really lightweith, having very affordable memory and disk requirements (Ref: https://freepascal.org/docs-html/current/user/usersu1.html#x9-80002.1.1):

  1. 8 Megabytes of free memory. This is sufficient to allow compilation of small programs.
  2. Large programs (such as the compiler itself) will require at least 64 MB. of memory, but 128MB is recommended. (Note that the compiled programs themselves do not need so much memory.)
  3. At least 80 MB free disk space. When the sources are installed, another 270 MB are needed.

What We Need

As usual, I suggest adding from now to your favourite e-commerce shopping cart all the needed hardware, so that at the end you will be able to evaluate overall costs and decide if continue with the project or remove them from the shopping cart. So, hardware will be only:

Raspberry PI Zero WH board

Check hardware prices with following links:

Amazon raspberry pi boards box
Amazon raspberry pi Zero W box
Amazon Micro SD box
Amazon Raspberry PI Power Supply box

Step-by-Step Procedure

Prepare OS Environment

As usual, start from OS installation and update. After installing Raspberry PI OS Lite, please make your OS up-to-date:

sudo apt update
sudo apt upgrade

Install and Configure Free Pascal and Terminal IDE

Having Aptitude, installing Free Pascal is really simple as executing following command from Raspberry PI terminal:

sudo apt install fpc

This will download alla dependencies, installing and configuring Free Pascal command line (fpc) in your system. Let’s check what version is installed:

pi@raspberrypi:~ $ fpc -iV
3.0.4

Version will be helpful in a while…

From here. your fpc terminal command is ready to work, using system config file available in “/etc/fpc.cfg” path. You can compile Pascal programs files (usually “.pas” files) and execute them.

Using Free Pascal IDE

But fpc installation includes also a useful terminal IDE, that you can enable with the simple terminal command:

fp

Resulting in following IDE from terminal:

Raspberry PI Free Pascal IDE home

Navigating in FP IDE is quite simple but not intuitive. Basically, main keys / chortcuts you will use:

  • arrows: move inside active window
  • ALT+ red menù letter: open selected menù drop down list
  • F6 or SHIFT+F6: move between Windows
  • ALT+F3: Close active window
  • ALT+x: Exit IDE
  • TAB: move between selectable items inside a window
  • ESC: exit from selection

More shortcuts can be found in Free Pascal Keyboard shortcuts page.

When you launch Free Pascal IDE, it will create in your current directory 3 files (if not already available): fp.cfg, fp.dsk and fp.ini. These files owns local configurations for your IDE, which are unlinked from fpc system configuration.

pi@raspberrypi:~ $ ls
fp.cfg fp.dsk fp.ini

Testing Hello World Program

From here, we’ll create our classic hello world first program.

From IDE home, create a New File (ALT+f -> New):

Raspberry PI Free Pascal IDE New File

Copy following text inside your editor:

program HelloWorld;

begin
 writeln('Hello World, peppe8o.com!');
end.
Raspberry PI Free Pascal IDE New hello world

Save your file as “hello_world.pas” (ALT+f -> “Save as” -> write hello_world.pas -> press ENTER):

Raspberry PI Free Pascal IDE Save as hello world

Before running your program, you need to compile it to check if code is correct (ALT+C -> “Compile”). You will note following compiling error:

Raspberry PI Free Pascal IDE hello world compile error 1

reporting following info:

Main file: hello_workd.pas
Failed to compile…
Target: Linux for ARMHF
Line number: 0 Total lines: 2
Used memory: 124K Allocated memory: 896K
Total errors: 2 Compile time: 0.2s

Compile failed

Pressing ALT+F3, you will close Compiling result window and activate Compiler Messages Window reporting:

(3,1) Fatal: Can't find unit system used by HelloWorld
(0) Fatal: Compilation aborted

This is a common and simple error. FP IDE, as said, started with local configuration unlinked to system configuration. FOr this reason we need to add paths to units required. Be aware that changing directory where you launch fp IDE will result in new local config files and will require same operation.

Let’s add required paths. Go under Options menu (ALT+o) -> “Directories”. Press Tab utill editing screen becames editable and add following paths, caring to change version (mine is 3.0.4) to your one:

/usr/lib/arm-linux-gnueabihf/fpc/3.0.4/units/arm-linux
/usr/lib/arm-linux-gnueabihf/fpc/3.0.4/units/arm-linux/*
/usr/lib/arm-linux-gnueabihf/fpc/3.0.4/units/arm-linux/rtl
Raspberry PI Free Pascal IDE add units path to directories

Press tab to activate “OK” button and then ENTER.

Close Compiler Messages Windows (ALT+f3) if still open, to go back in you code.

With new configuration on place, try again to compile (ALT+c -> “Compile”). This will result in a more pleasant “Compile Successful” message:

Raspberry PI Free Pascal IDE hello world compile successful

Press any key to go back on code. Run your code by selecting Run menù (Alt+r) -> Run. This will move back you terminal window in ssh shell and show your hello world program running by writing “Hello World, peppe8o.com!”:

Raspberry PI Free Pascal IDE hello world running

Final operation, close FP IDE (ALT+x) and go back to terminal. Checking again your folder content, you will find a few more files:

pi@raspberrypi:~ $ ls
fp.cfg fp.dsk fp.ini hello_world hello_world.o hello_world.pas
  • fp.cfg, fp.dsk and fp.ini have been already discussed. Directories included are available inside fp.cfg file.
  • hello_world.pas contains our program code, that you can check and edit from terminal
  • hello_world and hello_world.o are generated in compiling procedure. hello_world.o contains compiled code. hello_world is the executable code. You can now run it also from terminal by typing “./hello_world” resulting in following output:
pi@raspberrypi:~ $ ./hello_world
Hello World, peppe8o.com!

Enjoy!

How useful was this post?

Click on a star to rate it anonymously!

Average rating 5 / 5. Vote count: 12

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?