arduino Archives

BMP180 Barometric pressure/temperature sensor with Arduino Uno 5 (1)

Umar Jamil — Thu, 15 Aug 2024 18:03:53 +0000

In this tutorial, we will use a Barometric pressure/temperature sensor BMP180 with Arduino Uno. This sensor has great application in tourism used by hikers, and climbers to deal with altitude, temperature and pressure. The mobile handset contains this module to keep updated on these parameters in offline mode. About the BMP180 Barometric Sensor The BMP180 […]

The post BMP180 Barometric pressure/temperature sensor with Arduino Uno 5 (1) appeared first on peppe8o.

Automatic irrigation system with Arduino and Sensors 5 (1)

Umar Jamil — Fri, 12 Apr 2024 15:00:00 +0000

5 (1)" rel="nofollow">

In this tutorial, we will be making an automatic irrigation system (AIS) with Arduino and the use of temperature, soil moisture and ultrasonic sensors. Based on the water level of the tank, temperature and moisture of the soil an automatic irrigation system is designed to keep the soil moisture. Introduction In the irrigation system, normally […]

The post Automatic irrigation system with Arduino and Sensors 5 (1) appeared first on peppe8o.

How to use a Stepper Motor with Arduino Uno and A4988 Driver 5 (3)

Umar Jamil — Thu, 01 Jun 2023 15:30:00 +0000

5 (3)" rel="nofollow">

In this tutorial, we will make stepper motor movement in clock and counterclockwise with Arduino Uno. The stepper motor is widely used in the application of the movements such as vehicles, and CNC printers. Introduction An Arduino Uno or other comparable microcontrollers may control stepper motors using the popular and frequently used A4988 stepper motor […]

The post How to use a Stepper Motor with Arduino Uno and A4988 Driver 5 (3) appeared first on peppe8o.

Unleash the Potential of the Internet: 10 Essential IoT Starter Kits to Kickstart Your Journey 5 (2)

peppe8o staff — Mon, 15 May 2023 20:27:42 +0000

5 (2)" rel="nofollow">

End your search for the ultimate, cost-effective IoT starter kits designed to help you construct innovative IoT solutions. With these exceptional smart device kits, your journey into the world of IoT begins here. The Internet of Things (IoT) represents the future of technology, a sector poised to attract billions of dollars in investment. If you’re […]

The post Unleash the Potential of the Internet: 10 Essential IoT Starter Kits to Kickstart Your Journey 5 (2) appeared first on peppe8o.

7-Segment Display with Arduino Uno 5 (1)

Umar Jamil — Tue, 25 Apr 2023 07:55:21 +0000

5 (1)" rel="nofollow">

In this tutorial, we will use an I2C 7-segment display with Arduino. This module is much used for the display which can be illuminated or turned off independently to display different numerical digits or other characters. By turning on and off the appropriate segments, the display can show any number from 0 to 9 or […]

The post 7-Segment Display with Arduino Uno 5 (1) appeared first on peppe8o.

How to use a Flex Sensor with Arduino Uno 5 (1)

Umar Jamil — Wed, 19 Apr 2023 15:19:04 +0000

5 (1)" rel="nofollow">

In this tutorial, we will use Arduino with a flex sensor to get the degree of bending. Flex sensors are commonly used in applications such as robotics, gaming controllers, medical devices, and musical instruments to get information about twisting. Introduction A flex sensor is a type of sensor that can detect the amount of bending […]

The post How to use a Flex Sensor with Arduino Uno 5 (1) appeared first on peppe8o.

Force Sensitive Resistor and Arduino: FSR402 Wiring and Code 5 (1)

Umar Jamil — Fri, 24 Mar 2023 08:27:17 +0000

5 (1)" rel="nofollow">

In this tutorial, we will use Force Sensitive Resistor with Arduino Uno to measure pressure and weight. Based on the pressure on the Force Sensitive Resistor, on the serial monitor, we’ll display the pressure values organized for ranges. Force Sensitive Resistor Introduction The FSR works on the basis of pressure. When some pressure applies to […]

The post Force Sensitive Resistor and Arduino: FSR402 Wiring and Code 5 (1) appeared first on peppe8o.

I2C Communication with Arduino Uno 3 (2)

Umar Jamil — Sun, 11 Dec 2022 21:41:21 +0000

3 (2)" rel="nofollow">

In this tutorial, I’ll show how to perform I2C communication with two Arduino boards. The potentiometer and LCD are used to display the data sharing from a master Arduino to the slave one. The tutorial shows the simulation results for the potentiometer values read from the master and applied to the slave and vice versa, […]

The post I2C Communication with Arduino Uno 3 (2) appeared first on peppe8o.